vision-148-shift-wheel-6lug-satin-gray-machined-17x8-500_3759.png
vision-148-shift-wheel-6lug-satin-gray-machined-17x8-lay-1000_8989.jpg
vision-148-shift-wheel-6lug-satin-gray-machined-17x8-500_3759.png
vision-148-shift-wheel-6lug-satin-gray-machined-17x8-lay-1000_8989.jpg

148 SHIFT SATIN GREY MACHINED FACE/LIP - 17x8 6 lug

$419.00

American Muscle - 148 SHIFT SATIN GREY MACHINED FACE/LIP

Size: 17X8

BP: 6x5.5

Bore: 87.10 mm

Offset: 0

Backspace: 4.50

Cap: C148SG-5V

Load Rating: 2500lbs

Tested to SAE J2530 standards

Note: - Purchasers Responsibility

1. Measure the backspacing on your vehicle to ensure correct fitment, without rubbing on the inner or outer body, lower control arms or tie rods

2. Measure the front and rear mounting hub to ensure correct centre bore size.

3. Consult the motor vehicle technical regulations from your local Department of Transport or seek engineering advice regarding the technical regulations in your region.

Add To Cart

American Muscle - 148 SHIFT SATIN GREY MACHINED FACE/LIP

Size: 17X8

BP: 6x5.5

Bore: 87.10 mm

Offset: 0

Backspace: 4.50

Cap: C148SG-5V

Load Rating: 2500lbs

Tested to SAE J2530 standards

Note: - Purchasers Responsibility

1. Measure the backspacing on your vehicle to ensure correct fitment, without rubbing on the inner or outer body, lower control arms or tie rods

2. Measure the front and rear mounting hub to ensure correct centre bore size.

3. Consult the motor vehicle technical regulations from your local Department of Transport or seek engineering advice regarding the technical regulations in your region.

American Muscle - 148 SHIFT SATIN GREY MACHINED FACE/LIP

Size: 17X8

BP: 6x5.5

Bore: 87.10 mm

Offset: 0

Backspace: 4.50

Cap: C148SG-5V

Load Rating: 2500lbs

Tested to SAE J2530 standards

Note: - Purchasers Responsibility

1. Measure the backspacing on your vehicle to ensure correct fitment, without rubbing on the inner or outer body, lower control arms or tie rods

2. Measure the front and rear mounting hub to ensure correct centre bore size.

3. Consult the motor vehicle technical regulations from your local Department of Transport or seek engineering advice regarding the technical regulations in your region.